TM 1-2840-252-23-3
8-14
CLEAN OIL COOLER ASSEMBLY
8-14
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powerplant Mechanic's Tool Kit,
NSN 5180-00-323-4944
Materials:
Dry Cleaning Solvent (E19)
Gloves (E24)
Personnel Required:
Aircraft Powerplant Repairer
Equipment Condition:
Off Engine Task
Oil Cooler Assembly Removed (Task 8-12)
Oil Cooler Assembly Disassembled (Task 8-13)
General Safety Instructions:
WARNING
Dry cleaning solvent (E19) is flammable and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area, away from heat and open flame. In case
of contact, immediately flush skin or eyes with water for at least 15 minutes. Get
medical attention for eyes.
1. Wear gloves ( E24). Flush internal passages of oil cooler (1) with dry cleaning solvent ((E19).
2. Clean external surfaces of oil cooler (1). Use dry cleaning solvent (E19) and brush.
3. Allow to drain and air-dry.
4. Clean tube assembly (2). Use dry cleaning solvent (E19).
FOLLOW-ON MAINTENANCE:
Inspect Oil Cooler Assembly (Task 8-15).
END OF TASK
8-42
