TM 1-2840-252-23-3
8-13
DISASSEMBLE OIL COOLER ASSEMBLY
8-13
INITIAL SETUP
Applicable Configurations:
All
Tools:
Deep-Style Socket, 1-Inch
Machinist's Vise
Jaw Caps
Materials:
Wiping Rag (E64)
Personnel Required:
Equipment Condition:
Off Engine Task
Oil Cooler Assembly Removed (Task 8-12)
General Safety Instructions:
WARNING
Lubricating oils cause paralysis if swallowed. Prolonged contact with them may
irritate the skin. Handle only in well-ventilated areas away from heat and flame.
Drain and store in approved metal safety containers. Avoid prolonged or repeated
contact with skin and do not take internally. Wash contacted area of skin
thoroughly after handling. If irritation of skin results, get medical attention. Get
medical attention for eyes.
WARNING |
Turbine fuels are very flammable. They may cause drying and irritation of skin or
eyes. Handle only in well-ventilated areas away from heat and open flame. Drain
and store in approved metal safety containers. Avoid prolonged or repeated
contact with skin and do not take internally. Wash contacted area of skin
thoroughly after handling. If irritation of skin results, get medical attention. Get
medical attention for eyes.
GO TO NEXT PAGE
8-40