TM 1-2840-252-23-3
7-31
REPAIR ACCESSORY ELECTRICAL HARNESS ASSEMBLY
7-31
INITIAL SETUP
Materials:
Applicable Configurations
Crocus Cloth (E16)
All
Personnel Required:
Tools:
Aircraft Powerplant Repairer
Powerplant Mechanic's Tool Kit,
Aircraft Powerplant Inspector
NSN 5180-00-323-4944
Equipment Condition:
Technical Inspection Tool Kit,
Off Engine Task
NSN 5180-00-323-5114
Hand File Set
NOTE
This repair is allowed provided it does not cause pin to break or crack.
1. Straighten bent pin (1) of electrical connector (2). Use long nose pliers to gently move pin (1) until it is
straight.
2. Remove corrosion from pin (1) of electrical connector (2). Use crocus cloth (E16).
3. Remove corrosion from sleeve (3) of electrical connectors (4).
Use round hand file.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-146
