TM 1-2840-252-23-3
7-17
CLEAN PRIMARY ELECTRICAL HARNESS ASSEMBLY (Continued)
7-17
2. Clean six electrical connectors (2). Use denatured alcohol (E17) and brush.
WARNING
When using compressed air for cleaning, use approved protective equipment for
eyes and face. Do not use more than 30 psig air pressure. Do not direct air
toward yourself or another person. Failure to comply could result in injury to
eyes or skin. In case of injury, get medical attention.
3. Wear goggles. Blow dry electrical connectors (2). Use clean, dry, compressed air.
FOLLOW-ON MAINTENANCE:
Inspect Primary Electrical Harness Assembly (Task 7-18).
END OF TASK
7-86
