TM 1-2840-252-23-3
7-4
REPAIR IGNITION COIL AND CABLE ASSEMBLY (Continued)
7-4
3.
Replace cracked sleeve (12) as follows:
a. Remove retaining ring (13).
b. Remove sleeve (12) with packing (14) and washer (15) from wire (16) and out of sleeve (17).
c.
Remove washer (18) and washer (19) from wire (16) and out of sleeve (17).
d. Insert new washer (20) and new washer (21) over wire (16).
e. Insert new washer (22) and new packing (23) on new sleeve (24). Insert over wire (16).
f.
Install new retaining ring (25).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-35
