TM 1-2840-252-23-2
6-61 INSTALL STARTING FUEL SOLENOID VALVE (Continued)
6-61
NOTE
If starting fuel solenoid valve is a replacement, do
steps 1 and 2 If same starting fuel solenoid that was
removed is to be installed, omit steps 1 and 2
1. Loosen nut (1), and remove elbow (2)and packing (3)
from removed starting fuel solenoid valve (4).
2. Install elbow (2)and packing (3) in serviceable
shown and tighten nut (1)
GO TO NEXT PAGE
6-174
