TM 1-2840-252-23-2
6-55
INITIAL SETUP
Materials.
Crocus Cloth (El 6)
Applicable Configurations
All
Personnel Required-
Aircraft Powerplant Repairer
Tools:
Dry, Compressed Air
Aircraft Powerplant Inspector
Powerplant Mechanic's Tool Kit,
Equipment Condition
NSN 5180-00-323-4944
Off Engine Task
Technical Inspection Tool Kit,
NSN 5180-00-323-5114
NOTE
This repair is allowed provided it
does not cause pins to break or
crack.
(2) Using long-nose pliers, gently move pins (1) until
they are straight
2. Remove corrosion from pins (1of overspeed
)
solenoid valve (2) Polish pins, using in and out
motion over entire length of pin until corrosion is
removed Use crocus cloth (El 6)
WARNING
When using compressed air for
cleaning, use approved protective
equipment for eyes and face. Do not
use more than 30 psig air pressure.
Do not direct air toward yourself or
another person. Failure to comply
could result in injury to eyes or skin.
In case of injury, get medi- cal
attention.
3. Wear goggles Remove loosened panicles from pins
(1), using clean, dry, compressed air
INSPECT
FOLLOW-ON MAINTENANCE
None
END OF TASK
