TM 1-2840-252-23-2
6-21
INITIAL SETUP
Equipment Condition.
Primer Tube Assembly Removed (Task 6-20)
Applicable Configurations:
All
General Safety Instructions:
WARNING
Tools:
Goggles
Compressed Air Source
Dry cleaning solvent (E19) is flammable
and toxic. It can irritate skin and cause
Materials:
Dry Cleaning Solvent (El 9)
burns. Use only in well-ventilated area,
Gloves (E24)
away from heat and open flame. In case
Lint-Free Cloth (E30)
of contact, immediately flush skin or
eyes with water for at least 5 minutes
1
.
Personnel Required:
Aircraft Powerplant Repairer
Get medical attention for eyes.
1
Clean primer tube assembly (1) s follows
a
a. Wear gloves (E24) Immerse primer tube assembly
(1) in dry cleaning solvent (E19) and agitate.
b. Wipe dry. Use lint-free cloth (E30).
WARNING
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than 0
3
psig air pressure. Do not direct air
toward yourself or another person.
Failure to comply could result In Injury
to eyes or skin. In case of Injury, get
medical attention.
c Wear goggles. Blow dry internal passages using
clean, dry, compressed air.
FOLLOW-ON MAINTENANCE
Inspect Primer Tube Assembly (Task 6-22)
END OF TASK
