TM 1-2840-252-23-2
5-30
BACKLASH CHECK OVERSPEED DRIVE AND OUTLET COVER
5-30
ASSEMBLY (Continued)
NOTE
If backlash is less than 0.007 inch, a thin-
ner shim must be installed If backlash is
greater than 0.013 inch, a thicker shim
must be installed Increasing or decreasing
shim thickness by 0.002 inch will change
backlash approximately 0.001 inch
c. Select shim from shim selection table
15.
Repeat steps 8 thru 13
SHIM SELECTION TABLE
SHIM PART
SIZE
NUMBER
(INCH)
2-080-229-01
0.0015-0.0035
2-080-229-02
0.004-0.006
2-080-229-03
0.007-0.009
2-080-229-04
0.010-0.012
2-080-229-05
0.013-0.015
2-080-229-06
0.016-0.018
2-080-229-07
0.019-0.021
2-080-229-08
0.022-0.024
2-080-229-09
0.025-0.027
2-080-229-10
0.028-0.030
2-080-229-11
0.031-0.033
2-080-229-12
0.034-0.036
2-080-229-13
0.037-0.039
2-080-229-14
0.040-0.042
2-080-229-15
0.043-0.045
2-080-229-16
0.046-0.048
GO TO NEXT PAGE
5-97
