TM 1-2840-252-23-2
5-3
CLEAN ACCESSORY GEARBOX ASSEMBLY (Continued)
5-3
2. Clean spacer(2), gearshaft (3), and housing
(4) as follows
a. Immerse and agitate in dry cleaning solvent (E19)
b. Wipe dry using clean, lint-free cloth (E30)
WARNING
When using compressed air for clean- ing, use
approved protective equipment for eyes and
face. Do not use more than 30 psig air
pressure. Do not direct air toward yourself or
another person. Failure to comply could result
in injury to eyes or skin. In case of injury, get
medical attention.
c. Wear goggles Blow dry internal and external
surfaces using clean, dry, compressed air
3. Clean oil sampling drain cock (5), oil scav-
enge housing (6), relief valve (7), and collector (8)
a. Immerse and agitate in dry cleaning solvent (E1 9)
b. Wipe dry using clean, lint-free cloth (E30)
GO TO NEXT PAGE
5-18
