TM 1-2840-252-23-2
4-57
INSTALL SECOND TURBINE DISC ASSEMBLY (AVIM) (Continued)
4-57
14. Remove six bolts (11) and three locking plates(12).
NOTE
Bolts must be installed in accordance with index
numbers marked on bolt heads and second turbine
disc assembly.
NOTE
In following step 15., do not bend up tabs of locking
plates.
15. Align matchmarks (27 and 28) and install seal (29),
three locking plates (12) and six bolts (11).
16. Stagger tighten bolts (11) Torque to 155 inch-
pounds.
GO TO NEXT PAGE
4-310
