TM 1-2840-252-23-2
4-45 INSTALL NO. 4 AND 5 BEARING OIL TUBES (AVIM) (Continued)
4-45
WARNING
Lubricating oils cause paralysis if swal-
lowed. Prolonged contact with them
may irritate the skin. Handle only in
well-ventilated areas away from heat
and flame. Drain and store in approved
metal safety containers. Avoid pro-
longed or repeated contact with skin
and do not take internally. Wash con-
tacted area of skin thoroughly after han-
dling. If irritation of skin results, get
medical attention Get medical attention
for eyes.
CAUTION
Be sure to apply a light coat of lubricat-
ing oil on faceplate before installation.
Failure to comply will cause damage to
aft seal during dry running of initial en-
gine starts.
h. Wear gloves (E24) Apply light coat of lubri-
cating oil (E35 or E36) on faceplate (6) Align
bolt holes (19) and install aft seal and re-
tainer (5) and three screws (4)
GO TO NEXT PAGE
4-238
