TM 1-2840-252-23-2
4-33
REMOVE FOURTH STAGE POWER TURBINE ROTOR (AVIM) (Continued)
4-33
3. Remove nut (5)as follows:
a. Insert handle (11) in torque multiplier (T50) (7) Turn
handle (11) counterclockwise until nut (5) is loose.
b. Remove handle (11), torque multiplier (T50) (7),
drive bar (8), and torque fixture (Tl9) consisting of
wrench (3) and holding fixture (4).
c. Remove nut (5) and locking cup (2).
d. Matchmark shaft groove (12) and fourth stage
turbine rotor (13) Using marking pencil (E38).
GO TO NEXT PAGE
4-133
