TM 1-2840-252-23-2
4-21
INITIAL SETUP
Combustion Section and Power Turbine Removed
Applicable Configurations:
Combustion Section and Power Turbine Disas-
All
sembled (Task 3-6)
Thermocouple Harness Assemblies Removed
Tools:
Powerplant Mechanic's Tool Kit
NSN 5180-00-323-4944
General Safety Instructions:
Materials:
Dry Cleaning Solvent (E19)
WARNING
Gloves (E24)
Dry cleaning solvent (E19) is flammable
Lint-Free Cloth (E30)
and toxic It can irritate skin and cause
burns. Use only in well-ventilated area,
Personnel Required:
Aircraft Powerplant Repairer
away from heat and open flame In case
of contact, immediately flush skin or
Equipment Condition:
Off Engine Task
eyes with water for at least 5 minutes.
1
Engine Oil System Drained (Task 1-69)
Get medical attention for eyes
1. Clean thermocouple harness assembly (1) as follows
Do not immerse In dry cleaning solvent. It
may cause malfunction of probes or
breakdown of Internal wiring insulation.
a. Wear gloves (E24). Wipe clean with lint-free cloth
(E30) dampened in dry cleaning solvent (E19) Use
brush to loosen carbon on probes (2).
b. Wipe dry. Use clean, dry lint-free cloth (E30).
FOLLOW--ON MAINTENANCE
Inspect Thermocouple Harness Assemblies (Task 4-22).
END OF TASK
