TM 1-2840-252-23-2
4-5
TEST THERMOCOUPLE JUMPER LEAD
4-5
measure
of
2.
Using
thermocouple jumper lead (1) s follows:
a
a.
Set multimeter range switch to RX 1.
b.
Touch red probe (2) to terminal lug (5).
c.
Touch black probe (4) to electrical connector pin
A (7).
Meter shall indicate zero ohms maximum. If
d.
meter indicates more than zero ohms, tag
thermocouple jumper lead as defective. Use tag
(E58).
GO TO NEXT PAGE
4-15
