TM 1-2840-252-23-2
3-9
DISASSEMBLE COMBUSTION SECTION (AVIM) (Continued)
3-9
6. Remove lockwire and 28 bolts (11)
7. Loosen vane segment (1) from lip (12) Hammer lightly
in aft direction on inner shroud (13) Use soft-faced
hammer and phenolic drift (Appendix E) (14).
8. Remove vane segment (1) Tip leading edge (15)
inward and pull from combustion chamber housing (3).
GO TO NEXT PAGE
3-119
