CLEAN AND INSPECT FILTER BYPASS VALVE

CLEAN AND INSPECT FILTER BYPASS VALVE (Continued)

TM-55-2835-208-23 Transportability Guidance Small Emplacement Excavator (SEE) High Mobility Entrencher (HME) High Mobility Material Handler (HMMH) Manual
Page Navigation
210

TM 55-2835-208-23 2-90 CLEAN AND INSPECT FILTER BYPASS VALVE 2-90 INITIAL SETUP Materials Required: Applicable Configurations: Dry-Cleaning Solvent (E20) Lint-Free Cloth (E13) Al1 Personnel Required: Tools: 68B Aircraft Powerplant Repairer Engine Repairman’s Tool Kit 68B Powerplant Inspector NSN 5180-00-323-4944 Rubber Gloves Equipment Condition: NSN 8415-00-266-8677 Source of Low Pressure Compressed Off APU Task A ir Eye Protection Dry-cleaning solvent (E20) is flammable and toxic. It can irritate skin and cause burns. Use only in well-ventilated area, away from heat and open flame. Wear gloves and eye pro- tection. In case of contact, immediately flush eyes or skin with water for at least 15 minutes. Get medical attention for eyes. 1. Wearing gloves , wipe filter bypass valve with clean cloth (E13) dampened with dry-clean- ing solvent (E20). = Use goggles to protect eyes and face when using compressed air. Do not exceed 30 psig. Do not direct airstream towards yourself of another person. Failure to comply may result in injury to personnel. GO TO NEXT PAGE 2-166

Privacy Statement
Press Release
Contact