1-88 CHECK FOR SEAL LEAKAGE (NO. 4 AND 5 BEARING) (AVIM) (Continued)
In following step, hold No. 4 and 5 bear-
ing lube adapter using open-end wrench
(T53). Failure to use wrench may result
in damage and dislocation of oil transfer
tube resulting in oil leaks.
a. Place open-end wrench (T53) (7) on No. 4
and 5 bearing lube adapter (15).
b. Remove seal leakage taster hose (19) from re-
GO TO NEXT PAGE