1-85.1 INSPECT ENGINE SERVICEABILITY (Continued)
When installing filter on connector, be
careful not to push in or deform screen of
filter. Pushed in or deformed screen may
cause false chip indications
f. Install fitter (11) on connector (12).
g. Install packings (10) in grooves (13) on chip
h. Install chip detectors (9) in housing (14).
23. Start and run engine for five minutes (Ref. TM
24. Shut down engine using normal shutdown
procedure (Ref. TM 55-1520-240-10 or Task 1-
25. Inspect chip detector, oil filter, and bearing
a. If quantity of chips are not significantly less,
replace defective component or engine.
b. If quantity of chips are significantly less,
return engine to service.
If during the above steps chips are found at
the last chance filters, replace engine.
END OF TASK