TM 55-2835-209-23
4-11 REPLACE FUEL FILTER ASSEMBLY (CONT)
REMOVAL
1.
Remove fuel control upper cover
(Task 4-1).
The fuel control assembly fil-
ter cover will contain fuel
after removal.
To prevent
fire hazards, be sure no
sparks or open flame within 50
feet.
2.
Place machinery towel (D20) in fuel
control assembly lower cover under
fuel filter assembly. Loosen bolts
(1) (do not remove).
3.
Rotate fuel filter cover (2)
counterclockwise approximately one-
eighth turn and pull fuel filter
cover back as far as possible.
4.
Using thumb and fore finger, pull
fuel filter assembly (3) out of fuel
control assembly. Remove fuel fil-
ter cover (2). fuel filter assembly
(13) and packing (4).
5.
Remove and discard packing (4) and
fuel filter assembly (3). Put fil-
ter (3) in plastic bag (D2).
4-32
Change 1