CAUTION
TM 55-2835-209-23
4-11 REPLACE FUEL FILTER ASSEMBLY (CONT)
INSTALLATION
NOTE
Prior to assembly, all compo-
nents will be visually in-
spected for damage.
1.
Lubricate packing (1) inside fuel
filter element (2) and packing (3)
with lubricant (D19). Install pack-
ing (3) on fuel filter cover (4).
2.
Install fuel filter element (2) in
fuel filter cover (4) with packing
end out.
3.
Install fuel filter cover (4) over
bolts (5).
Turn fuel filter cover
clockwise approximately one-eighth
turn.
To prevent breaking fuel fil-
ter cover ears, be sure fuel
filter cover is fully seated
prior to tightening bolts.
4.
Secure fuel filter cover (4) to fuel
control assembly with bolts (5).
Toraue bolts to 37 to 43
inch-pounds.
5.
Remove machinery towel (22) and wipe
up any excess fuel.
6.
Perform leak check.
7.
Install fuel control upper cover
(Task 4-10).
FOLLOW-ON MAINTENANCE: MOC required.
E-66A-232
Change 1
4-33