Aircraft Powerplant Repairer
Off Engine Task
Technical Inspection Tool Kit,
1. Straighten bends or distortion in area of bolt holes
(1) in bracket (2).
This repair is allowed as long as it does not generate
cracks beyond the following limits:
a. There shall be no more than one edge-to-bolt hole
crack (3) per each bolt hole (1).
b. At bolt holes with edge-to-bolt hole crack (3), there
shall be no more than one additional crack (4) Crack
(4) shall be no more than 1/16 inch long.
c. There shall be no converging cracks (5) that might
cause material to fall out.
END OF TASK