CLEAN FUEL BOOST PUMP ASSEMBLY
Off Engine Task
General Safety Instructions.
Dry Cleaning Solvent(E19)is flammable and tox. c
It can irritate skin and cause burns. Use only
Dry cleaning solvent (E19)
well-ventilated area, away from heat and open
flame. In case of contact immediately flush
Lint-Free Cloth (E30)
skin or eyeswith water for at least15 minutes
Get medical attention for eyes.
1. Wear gloves (E24) Clean fuel boost pump
assembly (1).Use dry cleaning solvent (El 9) and
2. Remove any remaining solvent ith clean, lint-
free cloth (E30).
END OF TASK