8-58 REMOVE HOSE ASSEMBLY (PRESSURE CONNECTOR TO NO. 4 AND 5
8-58
BEARING FILTER) (Continued)
In following step, hold No. 4 and 5
bearing lube adapter using open-end
wrench (T53). Failure to use wrench
may result in damage and dislocation
of oil transfar tube resulting in oil
leaks.
11. Place open-end wrench (T53) (29) on No. 4
and 5 bearing lube adapter (30).
12. Disconnect hose assembly (31) from reducer
(32).
13. Disconnect hose assembly (31) from oil tee
and snubber (33) and remove hose assembly
(31).
GO TO NEXT PAGE
8-189
