TM 55-2840-254-23
8-56
8-56 REMOVE TUBE ASSEMBLY (N0. 4 AND 5 BEARlNG SCAVENGE CONNECTOR
TO HOSE ASSEMBLY (Continued)
In following step, hold No. 4 and 5
bearing scavvenge adapter using open-
end wrench (T53). Failure to use
wrench may result in damage and mis-
Iocation of oil transfer tube resulting
in oil leaks.
5. PIace open-end wrench (T53) (12) on No. 4 and
5 bearing scavenge adapter (13).
6. Disconnect tube assembly (14) from reducer
(15).
7. Disconnect tube assembly (14) from hose assem-
GO TO NEXT PAGE
8-167
