TM 55-2840-254-23
8-51 INSTALL TUBE ASSEMBLY (INLET HOUSING TO MAIN OIL PUMP (Continued)
8-51
6. Remove Iockwire and loosen bolts (16).
In following step 7., make sure bracket
is positioned properly. This will ensure
that tube assembly does not hit housing
at either end when engine is hot. This
could cause tube assembly to bend and
result in oil leakage.
7. Reposition bracket (5) to obtain equal clearance
at points A, B, and C between bracket (5) and
tube assembly (4).
GO TO NEXT PAGE
8-144
