TM 55-2840-254-23
7-1
7-1 REMOVE IGNITION COIL AND CABLE ASSEMBLY (Continued)
When discharging ignition exciter, re-
move one lead at a time and discharge
receptacle that lead was removed from.
Failure to do so may result in serious
shock when you are removing second
lead. In case of serious shock, get medi-
cal attention.
NOTE
Step 3. applies to both output recep-
tacles.
3. Discharge ignition exciter (5) by placing tip of
insulated screwdriver (6) against pin (7) and
edge (8) of receptacle (9).
GO TO NEXT PAGE
7-6
