TM 55-2840-254-23
1-93
1-93 INSPECT ENGINE HOT END (AVIM) (Continued)
(c) Inspect brazement (193) between
long vane (194) and outer shroud
(185). There shall be no cracks or
lack of braze (195) longer than
3/8-inch.
35. If inspection criteria in steps 11. thru 34. are
not met, remove, clean, inspect, repair or re-
place defective parts. Refer to following tasks
as needed.
a. Remove, clean, inspect, and install fireshield
assembly (Ref. Tasks 4-12, 4-13, 4-14, and
4-15).
b. Remove, clean, inspect, and install primer
tuba assembly (Ref. Tasks 6-21, 6-22, 6-23,
and 6-24).
c. Remove, clean, inspect, repair, and install
left- and right-hand fuel manifold assem-
blies (Ref. Tasks 6-16, 6-17, 6-18, 6-19,
and 6-20).
d. Remove, clean, inspect, and install flow
divider and bracket (Ref. Tasks 6-42, 6-43,
6-44, and 6-45).
GO TO NEXT PAGE
1-363
