1-88 CHECK FOR SEAL LEAKAGE (N0. 4 AND 5 BEARlNG) (AVlM) (Continud)
1-88
In following step, hold No. 4 and 5 bear-
ing scavenge adapter using open-end
wrench (T53). Failure to use wrench
may result in damage and dislocation of
oil transfer tube resulting in oil leaks.
3. Place open-end wrench (T53) (7) on No. 4 and
5 bearing scavenge adapter (8).
4. Disconnect tube assembly (9) from reducer (10).
In folIowing step, hold No. 4 and 5 bear-
ing scavenge adapter using open-end
wrench (T53). Failure to use wrench may
result in damage and dislocation of oil
transfer tube resulting in oil leaks.
5. Place open-end wrench (T53) (7) on No. 4 and 5
bearing scavenge adapter (8).
6. Install pressure cap (11) on reducer (10).
GO TO NEXT PAGE
1-286
