1-87 CHECK FOR SEAL LEAKAGE (NO. 2 BEARING PACKAGE) (AVIM) (Continued)
1-87
NOTE
Following procedure may be performed
on the aircraft, on modular engine test
stand or on the engine "L" stand. Pro-
cedure with engine installed on engine
"L" stand is shown.
1. Disconnect hose (1) from fitting (2).
2. Disconnect hose (3) from fitting (4).
3. Install cap (5) on fitting (2).
4. Check seal leakage tester (T44) (6) as follows:
GO TO NEXT PAGE
1-274
