TM 55-2840-254-23
1-37
NO COMBUSTION DURING START - IGNITION SYSTEM NORMAL (Continued)
1-37
INSTALL HOSE ASSEMBLY (REF. TASK 6-57).
INSTALL SERVICEABLE HOSE ASSEMBLY
REMOVE HOSE ASSEMBLY (OIL COOLER TO
(REF. TASK 6-55).
IN-LINE FUEL FILTER) (REF. TASK 6-54).
IS HOSE ASSEMBLY RESTRICTED?
INSTALL SERVICEABLE HOSE ASSEMBLY
INSTALL HOSE ASSEMBLY (REF. TASK 6-55).
(REF. TASK 6-59).
REMOVE HOSE ASSEMBLY (IN-LINE FUEL
FILTER TO FLOW DIVIDER) (REF. TASK
6-58). IS HOSE ASSEMBLY RESTRICTED?
DISCONNECT DC POWER SOURCE TO IGNl-
TION EXCITER OR OPEN CIRCUIT BREAKER
TO PREVENT POSSIBILITY OF FIRE.
INSTALL HOSE ASSEMBLY (REF TASK 6-59)
CONNECT MAIN FUEL HOSE AT INLET OF
DISCONNECT MAIN FUEL HOSE AT INLET OF
FUEL CONTROL. REPLACE FUEL BOOST
FUEL CONTROL. PLACE END OF HOSE INTO
PUMP (REF. TASK 6-9).
UTILITY PAIL. HAVE HELPER MOTOR EN-
GINE AT 10 TO 15 PERCENT N1 SPEED (REF.
TM 55-1520-240-10 OR TASK 1-107)
IS FUEL BEING PUMPED INTO PAIL?
DISCONNECT DC POWER SOURCE TO
IGNITION EXCITER OR OPEN CIRCUIT
BREAKER TO PREVENT POSSIBILITY OF
FIRE.
GO TO NEXT PAGE
1-134
