TM 55-2840-254-23
1-26
1-26 REMOVE ENGINE FROM SHIPPING AND STORAGE CONTAINER (Continued)
28. Install hoist and chain with hooks (Appendix
E) (14) to cover assembly (15). Raise cover as-
sembly (15).
29. Clean flange surface (36) on al I four sides of
cover assembly (15). Use wire brush. If rough
projections exist, smooth projections out us-
ing half round file.
30. Wipe sealing gasket (34) clean using lint-free
cloth (E26).
31. Apply light coat of glycerol (E21) on sealing
gasket (34). Install sealing gasket (34) in groove
(37) of base assembly (16).
GO TO NEXT PAGE
1-75/(1-76 blank)
