TM 55-2835-209-23
Section VII CLEANING PROCESS #7 (ELECTRICAL COMPONENTS)
8-7 CLEANING PROCESS #7 (ELECTRICAL COMPONENTS)
INITIAL SETUP
Tools:
Air Gun
Gloves, Rubber
Hose Assembly
Safety Glasses
Scrub Brush
Personnel Required:
68B Aircraft Powerplant Repairers
Materials/Parts:
Dry Cleaning Solvent (D35)
Lint-Free Wipe (D42)
Equipment Conditions:
Off APU Maintenance
General Safety Instructions:
Compressed air is dangerous
when directed toward yourself
or another person.
The air-
stream of material blown by
the airstream can cause inju-
ry, particularly to the eyes
and face.
Use goggles to pro-
tect eyes and face.
Do not
exceed 30 PSI. Do not direct
airstream toward yourself or
another person.
Dry cleaning solvent is toxic
to skin, eyes and respiratory
tract.
Skin, eye and respir-
atory tract protection re-
quired.
Avoid repeated or
prolonged contact.
1.
Wipe external surfaces of electrical 3.
Dry connectors thoroughly with
harness with lint-free wipe (D42)
clean, filtered compressed air. Be
dipped in dry cleaning solvent
(D35).
sure they are dry and free of for-
eign matter.
2.
Clean electrical connector pins/
sockets with a fiber brush dipped in
dry cleaning solvent (D35).
FOLLOW-ON MAINTENANCE: None.
8-7/(8-8 blank)
