ARMY
TM 5-6115-612-34
MARINE CORPS TM 6115-34/8
AIR FORCE
TO 35C2-3-471-2
NAVY
AG-320B0-MME-000
9-2. EXHAUST DUCT ASSEMBLY. (cont)
c.
Installtion. (cont)
(3) Ensure
that clamp (32) is
securely in position and nut (33) is
(3) Install sound/thermal insula-
tight.
Torque to 30-35 inch pounds
tion (20) on back of exhaust liner.
(3.4-4.0 Nm).
Install exhaust duct inner side panel
(19).
Secure with lockwashers (18),
washers (17), and bolts (16).
(4) Install engine housing access
cover and
secure with
turnlock
(4) Install sound/thermal insula-
fasteners.
tion (15) on side of exhaust liner.
Install exhaust duct end panel (14).
Secure with lockwashers (13), washers
(12), and bolts (11).
(5) Carefully
place
assembled
b. Removal.
exhaust duct liner (10) into exhaust
fender.
Secure with washers (9) and
screws (8).
(1) Loosen turnlock fasteners and
remove engine housing access cover.
(6) Install exhaust fender panel
(7). Secure with lockwashers (6),
WARNING
washers (5), and screws (4). Torque to
36-40 inch pounds (4.1-4.5 Nm).
To prevent injury, do not perform
maintenance on hot components.
(7) Install exhaust door (3) and
Allow adequate time for cooling.
secure with lockwashers (2) and screws
(1).
(2) Loosen clamp nut (33) until
clamp latch can be lifted.
9-3 EXHAUST RIM CLENCHING CLANP.
(3) Remove clamp (32).
a.
Inspection.
c.
Installation.
(1) Aline engine exhaust flange
(1) Loosen turnlock fasteners and
and exhaust nozzle flange.
remove engine housing access cover.
(2) Install clamp
(32) around
engine flange and nozzle flange.
WARNING
(3) Close clamp latch.
Torque
nut (33) to 30-35 inch pounds (3.4-3.95
To prevent injury, do not perform
Nm).
maintenance on hot components.
Allow adequate time for cooling.
(4) Install engine housing access
cover and
secure
with
turnlock
fasteners.
(2) Inspect clamp (32,
figure
9-2) for damage. Replace if damaged.
9-3
