A R MY
TM 5-6115-612-12
MARINE CORPS TM 6115-12/7
AIR FORCE
TO 35C2-3-471-1
NAVY
AG-320B0-0MM-OOO
4-37.
ELECTRICAL
FUEL
TRANSFER
PUMP .
(cont)
c.
Removal. (cont)
(4) Tag and disconnect fuel lines
from inlet (7) and outlet (8) ports.
(5) Remove
nuts
(9),
washers
(10), and capscrews (11) that secure
p u m p .
Remove pump.
d. Insta llatlon.
(1) Aline pump with mounting
holes and secure with capscrews (11),
washers (10), and nuts (9). Torque to
40-60 inch pounds (4.5-6.8 Nm).
(2) Remove tags and connect inlet
line to inlet port (7) and outlet line
to outlet port (8).
(3) Remove
tags
and
connect
electrical connector (6).
(4) Close fuel housing (paragraph
4-34c).
4-38. PRIMARY FUEL (FLUID) FILTER.
Maintenance of the primary fuel (fluid)
filter is limited to servicing and
replacement.
F i l t e r
element
replacement is recommended every 300
hours minimum.
a. service
(1) Gain access to fuel housing
(paragraph
4-34a).
(2) Place
suitable
container
under filter.
Open fuel drain valve
and drain all fuel from filter.
(3) Remove retaining screw (12,
figure 4-26), washer (13), and
preformed packing (14) to separate bowl
(15) from housing (17).
It may be
necessary to use a pick to remove
gasket (16) from housing (17).
(4) Remove and discard filter
element (18).
(5) Clean bowl and housing with
P-D-680.
Dry thoroughly.
(6) Install new filter element
(18) in bowl (15).
(7) Install new gasket (16) in
housing (17).
(8) Install
bowl in
housing.
Install new preformed packing (14) on
top of housing.
Secure assembly with
washer (13) and retaining screw (12).
(9) Close fuel housing (paragraph
4-34c).
b. Removal.
(1) Gain access to fuel housing
(paragraph 4-34a).
(2) Drain fuel system (paragraph
4-34b).
(3) Tag and disconnect inlet and
outlet fuel lines.
(4) Remove capscrews (19), lock-
washers (20), and spacers (21) that
secure filter to mounting bracket.
c.
Insta llation.
4-92
