TM 1-2840-252-23-3
ILLUSTRATED LIST OF MANUFACTURED ITEMS (Continued)
Nomenclature
Reference Task No.
Material Required
Third Turbine Rotor
4-37
Hardwood Stock
Support Block (AVIM)
Fabrication Instructions:
Fabricate third turbine rotor support block out of hardwood stock as follows:
1. Saw wood in accordance with sketch shown below.
2. Remove all rough edges with fine grain sandpaper.
NOTE: Size of required block may vary with distance from floor to turbine shaft. All dimensions are in inches.
Sketch or Diagram:
E-23
