TM 1-2840-252-23-3
ILLUSTRATED LIST OF MANUFACTURED ITEMS (Continued)
Nomenclature
Reference Task No.
Material Required
Bent Wire Gage (0.104 Inch)
4-36
AMS5645 QQ-S-763 (CRES321) or
(AVIM)
AMS5754 (Hastelloy X)
Fabrication Instructions:
Fabricate bent wire gage out of specified material as follows:
1. Form in accordance with sketch shown below.
2. Break all sharp edges.
NOTE: All dimensions are in inches.
Sketch or Diagram:
E-3
