TM 1-2840-252-23-3
8-121
ADJUST OIL LEVEL INDICATOR (Continued)
8-121
NOTE
If test light indicates adjustment is needed, do steps 5 and 6. If test light indicates adjustment is not needed,
omit steps 5 and 6.
5. Loosen two screws (13) and two nuts (14). Move switch (15) until test light (T9) (6) comes on at low oil level warning
position (12).
6. Tighten two nuts (14) and two screws (13).
GO TO NEXT PAGE
8-306
