TM 1-2840-252-23-3
8-115
DISASSEMBLE OIL LEVEL INDICATOR
8-115
INITIAL SETUP
Materials:
Applicable Configurations:
None
All
Personnel Required:
Tools:
Aircraft Powerplant Repairer
Powerplant Mechanic's Tool Kit,
Aircraft Electrician
NSN 5180-00-323-4944
Equipment Condition:
Soldering Iron, 15/32-Pound
Off Engine Task
Twist Drill, 15/64-Inch
Oil Level Indicator Removed (Task 8-114)
Retaining Ring Pliers
1. Remove two nuts (1), two washers (2),two screws (3), two washers (4), and pull switch (5) clear of housing (6).
2. Unsolder two wires (7 and 8) from two switch terminals (9) and remove switch (5).
GO TO NEXT PAGE
8-286
