TM 1-2840-252-23-3
8-101
REMOVE NO. 4 AND 5 BEARING FILTER (Continued)
8-101
CAUTION
In following step, hold No. 4 and 5 bearing lube adapter using open-end
wrench (T24). Failure to use wrench may result in damage and mislocation of
oil transfer tube resulting in oil leaks.
1.
Place open-end wrench (T24) (1) on No. 4 and 5 bearing lube adapter (2).
2.
Disconnect hose assembly (3) from reducer (4).
GO TO NEXT PAGE
8-256