TM 1-2840-252-23-3
8-75
REMOVE HOSE ASSEMBLY (PRESSURE CONNECTOR TO NO. 4 AND
8-75
5 BEARING FILTER) (Continued)
CAUTION
In following step, hold No. 4 and 5 bearing lube adapter using open-end wrench (T24).
Failure to use wrench may result in damage and mislocation of oil transfer tube resulting
in oil leaks.
10. Place open-end wrench (T24) (25) on No. 4 and 5 bearing lube adapter (26).
11. Disconnect hose assembly (27) from reducer (28).
12. Disconnect hose assembly (27) from oil tee and snubber (29) and remove hose assembly (27).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-189
