TM 1-2840-252-23-3
8-66
INSTALL TUBE ASSEMBLY (INLET HOUSING TO MAIN OIL PUMP)
8-66
(Continued)
6. Remove lockwire and loosen bolts (16).
In following step 7, make sure bracket is positioned properly. This will ensure that tube assembly does
not hit housing at either end when engine is hot. This could cause tube assembly to bend and result in
oil leakage.
7. Reposition bracket (5) to obtain equal clearance at points A, B, and C between bracket (5) and tube assembly (4).
GO TO NEXT PAGE
8-155
