TM 1-2840-252-23-3
8-18
INSTALL OIL COOLER ASSEMBLY (Continued)
8-18
NOTE
If flow programming valve is not installed, do step 1.. If flow programming valve is
installed, omit step 1..
1. Install oil cooler assembly (1) on interstage airbleed actuator (2) and bracket (3). Position bracket (4), and
bracket (5) on air bleed actuator (2). Loosely install bolt (6) and washer (7).
2. Install oil cooler assembly (1) on interstage-airbleed actuator (2) and bracket (3). Loosely install bolt (6)
and washer (7).
GO TO NEXT PAGE
8-48
