TM 1-2840-252-23-3
7-11
REMOVE IGNITION EXCITER (Continued)
7-11
WARNING
When discharging ignition exciter, remove one lead at a time and discharge
receptacle that lead was removed from. Failure to do so may result in serious
shock when you are removing second lead. In case of serious shock, get medical
attention.
NOTE
Step 2 applies to both output receptacles.
2. Remove lockwire and disconnect coil and cable assembly leads (2).
3. Discharge ignition exciter (3) by placing tip of insulated screwdriver (4) against pin (5) and edge (6) of receptacle
(7).
GO TO NEXT PAGE
7-73
