TM 1-2840-252-23-3
7-10
INSTALL SPARK IGNITERS (Continued)
7-10
NOTE
The procedure for installing four spark igniters at 3-, 6-, 9-, and 12-o'clock positions is
the same except for lockwiring. Only the 3-o'clock position is shown for installation.
NOTE
Install gently by hand until fully engaged.
1. Install spark igniter (1) on ignition lead (2).
CAUTION
To prevent shorting of ignition
lead, do not allow anti-seize
compound to touch electrical
contacts and insulators.
2. Apply a light coat of anti-seize compound (E6) to ignition lead
threads (3).
GO TO NEXT PAGE
7-66
