TM 1-2840-252-23-3
7-6
REMOVE SPARK IGNITERS (Continued)
7-6
WARNING
When discharging ignition leads, remove one lead at a time and discharge to
combustor housing. Failure to do so may result in serious shock when you are
removing other leads. In case of serious shock, get medical attention.
NOTE
The procedure for removal of four spark igniters located at the 3-, 6-, 9-, and 12-o'clock
positions is the same. Only the 3-o'clock position is shown.
1. Remove lockwire and ignition lead (1) from combustor
housing (2).
NOTE
If spark igniter stays with ignition
lead, do steps 2 and 3. If spark
igniter stays in combustor
housing do steps 4 and 5.
2. Discharge ignition lead (1) and spark igniter (3) by
touching to combustor housing (2).
GO TO NEXT PAGE
7-60
