TM 1-2840-252-23-2
4-54
REMOVE SECOND TURBINE DISC ASSEMBLY (AVIM) (Continued)
4-54
d. Install two puller shells (27) detail of GP spacer
puller assembly kit (T48) on GP spacer puller (17).
Install two 0.625 inch long socket head cap screws
(28) one turn only.
12. Install GP spacer puller (17) on second turbine
spacer as follows.
a. Turn T-handle (11) counterclockwise all the way.
b
Install GP spacer puller (17) on second turbine
spacer (24).
c. Make sure lip (29) of puller shells (27) engages
flange (30) of second turbine spacer (24).
d. Tighten two 0.625 inch long socket head cap screws
(28).
Make sure adapter is centered on second
turbine disc Pull second turbine spacer
slowly and evenly. If spacer is not pulled
off evenly, damage to spacer could
occur.
GO TO NEXT PAGE
4-295