TM 1-2840-252-23-2
4-41 PRESSURE TEST NO. 4 AND 5 BEARING OIL TUBES AND BEARING
4-41
PACKAGE (AVIM) (Continued)
WARNING
In following step 4, gradually loosen nut
on compressed airline and relieve air
pressure before removing. Failure to
comply may result in personal injury.
4. Remove pressure check fixture (T15as fol-
)
lows
a. Disconnect compressed air source
CAUTION
In following step, hold No. 4 and 5 bear-
mg lube adapter using open-end
wrench (T24). Failure to use wrench
may result in damage and mislocation
of oil transfer tube resulting in oil leaks
b. Place open-end wrench (T24) (6) on No 4
and 5 bearing lube adapter (10) and remove
nipple (12) and packing (11)
GO TO NEXT PAGE
4-223