TM 1-2840-252-23-2
4-40
INSTALL NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM)ontinued)
C(
4-40
23. If removed, install shim (55) on inner bolt circle on aft face of fourth turbine nozzle assembly (56)
CAUTION
In following step, be sure to use 22 new screws. Used screws could break and cause damage to engine
24. Coat 20 bolts (57) and 22 screws (58) with antiseize compound (E6)
25. Install heat shield (59),22 screws (58) and 20 bolts (57) Torque screws (58) to 23 inch-pounds, then torque bolts
(57) to 83 inch-pounds Lockwire screws (58) and bolts (57) Use lockwire (E32)
INSPECT
GO TO NEXT PAGE
4-198
