TM 1-2840-252-23-2
4-37
REMOVE NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
4-37
20. Remove three screws (51), and remove aft seal and
retainer (52).
21. Remove faceplate (53) and seal (54).
NOTE
In following step 22, tube (49) and pilot (50) are
part of seal removal tool set (T20).
22. Remove No. 4 and 5 bearing package aft seal (55)
as follows:
a
Position tube (49) on arbor press and place aft seal
and retainer (52) on tube (49).
b
Install pilot (50) on seal (55) Remove seal (55).
using arbor press.
FOLLOW-ON MAINTENANCE
None
END OF TASK
4-176
